Truck & Towing
48" Long, 4 Way Flat Style Extension Loop, Used As An Extension To Connect The Trailer End & Vehicle End While Towing, Use When The Trailer Wire Is Not Long Enough To Connect To The Vehicle Because The Trailer Frame Is Too Long, Use On 12V DC Circuits Only, Wire Insulation: Green, White, Brown & Yellow.
4 Way, Flat Trailer & Vehicle Wiring Kit, With 48" Car End Connector & A 12" Trailer End Connector With 6 Splice Connectors For Installation, Use On 12V DC Vehicle Circuits Only.
6 Round To 4 Flat, Electrical Circuit Adapter, Use In Towing Trailers When The Vehicle & Trailer Have Different Electrical Connections, If Vehicle Has A 6 Way Round Connector & Your Trailer Has A 4 Way Flat Style Connector Used For The Trailer Lights, Insert This Product Into The Vehicle 6 Way Round Connector & Plug The 4 Flat Trailer Connector Into It To Operate The Lights, Use Only On 12V DC Vehicle Circuits.
Trailer Wiring Adapter, Use With A Vehicle With A 7 Way RV Blade Style Towing Connector To Allow A Trailer With A 4 Way Flat Style Towing Connector To Hook Up To The Vehicle To Make The Stop/Tail/Turn Lights Function While Towing The Trailer, Made Of High Impact Plastic To Reduce Corrosion.
7 Way, RV Blade Style Connector, Used On A Trailer To Hook Up Trailer Stop/Tail/Turn Lights, Marker Lights, Electric Brakes & Auxiliary Power Circuits, Made Of High Impact Plastic To Reduce Corrosion, Use Only On 12V DC Vehicle Circuits.
Trailer Electrical System Adapter, Used To Wire A Vehicle From A 4 Way Flat Style Towing Electrical System To A 7 Way RV Blade Style Towing System, Connects To A 4 Way Flat Connector That Is Already Installed On The Vehicle & Then Splices Into The Other Vehicle Circuits For Electric Brakes, Side Marker Lighting & Auxiliary Power To The Trailer.
7 Way RV Pin Style Connector, Used On The Vehicle To Hook Up A Trailer With A 7 RV Pin Style Connector To Operate The Trailer Lights, Electric Brakes, Marker Lights & Auxiliary Power, Made Of High Impact Plastic To Reduce Corrosion, Us Only On 12V DC Vehicle Circuits.
7 Way RV To 6 Round Adapter, For A Vehicle With A 7 Way RV Blade Style Towing Connector To Allow A Trailer With A 6 Way Round Style Towing Connector To Hook Up To The Vehicle To Make The Stop/Tail/Turn Lights, Auxiliary Power & Electric Brakes, With The Center Pin Operating The Brakes, To Function While Towing The Trailer. Made Of High Impact Plastic To Reduce Corrosion.
7 Way RV To 4 Flat Or 6 Round Adapter, For A Vehicle With A 7 Way RV Blade Style Towing Connector To Allow A Trailer With A 4 Way Flat, 5 Way Flat Or 6 Round Style Towing Connector To Hook Up To The Vehicle To Make The Stop/Tail/Turn Lights & Electric Brakes To Function While Towing The Trailer, Made Of High Impact Plastic To Reduce Corrosion.
Trailer/Truck Red Identification Bar, 3 Light Incandescent Bar Used As An Identification Marker Light As Required By The DOT For Trailers Over 80" Of Width, Mounts In The Rear Of The Trailer, Screw Mount.
7 Way RV To 6 Round Adapter, Use For Vehicle With A 7 Way RV Blade Style Towing Connector To Allow A Trailer With A 6 Way Round Style Towing Connector To Hook Up To The Vehicle To Make The Stop/Tail/Turn Lights, Center Pin Auxiliary Power & Electric Brakes To Function While Towing The Trailer, Made Of High Impact Plastic To Reduce Corrosion.
3-1/4" x 1", Red, Trailer Marker Light, With White Mounting Base, Used On 12 V DC Vehicle Circuits Only.
7 Way RV To 5 Flat Adapter, Use For Vehicle With A 7 Way RV Blade Style Towing Connector To Allow A Trailer With A 5 Way Flat Style Towing Connector To Hook Up To The Vehicle To Make The Stop/Tail/Turn Lights & Electric Brakes To Function While Towing The Trailer, Made Of High Impact Plastic To Reduce Corrosion.
4-1/8" x 2", Red, Incandescent Marker Light, Used For Mounting On Trailers As A Side Marker Light To Identify That A Trailer Is Present As Required By The DOT.
4" x 2" x 1" High, Red, Double Bulls Eye Lens, Trailer Marker Clearance Light, With 2 Incandescent Bulbs, Required To Indicate The Presence Of A Trailer As Required By The DOT.